Now, until August 31, 2011, when you purchase three or more hand torque wrenches from the list of models below, you'll receive FREE calibration* from our A2LA Accredited Calibration Laboratory in Farmington Hills, Michigan. Available in the U.S only.
*First factory recalibration per unit is free and must be for the hand torque wrenches purchased from this promotion. Expires 24 months from shipping date.
Request a Quote
Call today, and mention Code: LTHTWP
888-684-2894
Hand Torque Wrenches
RS Technologies, a division of PCB Load & Torque, Inc., Series HT7000 Electronic Hand Torque Wrenches are lightweight, yet durable enough to be used in the toughest industrial environments. The narrowed head is ideal for access when space is at a premium, and the foam handgrips allow for operator comfort. Series HT7000 Wrenches can be used with Model 920 Portable Digital Transducer Instrument to provide in-spec/out-of-spec feedback. with all PCB® instrumentation, these products are complemented with toll-free applications assistance, 24-hour technical service, and are backed by a no-risk policy that guarantees Total Customer Satisfaction.
Highlights
• Durable, ergonomic design
• Lightweight, high strength
• Excellent overall accuracy
• Compatible with most strain gage instruments and data collectors
• Comfortable foam handle
• Available in a variety of drive sizes and capacities
Applications
• Post-assembly Torque Auditing
• Bolted Joint Troubleshooting
• High Precision Final Assembly
| Standard Hand Torque Wrenches |
|
|
|
| Model No. |
Capacity |
Drive Size |
Length |
Weight |
| 027125-04051 |
50 in-lb (5.6 N-m) |
¼-inch Square |
8.00 in (203 mm) |
12.8 oz (363 gm) |
| 027125-04012 |
100 in-lb (11.4 N-m) |
¼-inch Square |
8.00 in(203 mm) |
12.8 oz (363 gm) |
| 027137-04022 |
200 in-lb (22.7 N-m) |
3/8-inch Square |
12.00 in (305 mm) |
12.8 oz (363 gm) |
| 027137-04051 |
50 ft-lb (67.8 N-m) |
3/8-inch Square |
12.00 in (305 mm) |
12.8 oz (363 gm) |
| 027250-04101 |
100 ft-lb (135.6 N-m) |
½-inch Square |
21.00 in (540 mm) |
1.8 lb (0.8 kg) |
| 027250-04201 |
200 ft-lb (271.2 N-m) |
½-inch Square |
21.00 in (540 mm) |
1.8 lb (0.82 kg) |
| 027250-04301 |
300 ft-lb (407 N-m) |
½-inch Square |
28.00 in (711 mm) |
1.8 lb (0.8 kg) |
| Common Specifications |
| Output at Rated Capacity |
2 mV/V ±0.25% FS |
| Shunt Calibration |
2 mV/V with 44k Ohm Precision Resistor |
| Interchangeability |
Matched for mV/V and Shunt
Calibration ±0.3% FS |
| Overload Capacity |
150% FS |
| Non-linearity |
±0.25% FS |
| Hysteresis |
±0.25% FS |
| Excitation |
10 VDC or VAC (RMS) |
| Bridge Resistance |
350 Ohm Ω |
| Compensated Temperature Range |
+70 to +150 °F
+21 to +66 °C |
| Operating Temperature Range |
0 to +200 °F
-18 to +93 °C |
| Temperature Effect on Zero |
±0.01% FS/°F
±0.018% FS/°C |
| Temperature Effect on Output |
±0.001% RO/°F
±0.0018% RO/°C |
| Connector |
PT02H-8-4P |
| Supplied Accessories |
| Shunt Calibration Resistor, & A2LA Accredited Calibration Certificate |
| Recommended Accessories |
| Model 920 Portable Digital Transducer Instrument |
080920-01000 |
Standard Hand Torque Wrench
Cable Assembly, 10' Coiled,
PT to DB15 Male
Mating Connector, Standard |
097000-34149
42420-000600 / PT06A-8-4S |
Model 920 Portable Digital Transducer Instrument fits comfortably in the hand, and is both powerful and accurate enough to be used as a primary standard for auditing most torque applications in manufacturing and quality departments. Model 920 can be easily set up for use with hand torque wrenches to measure fastener assembly preload and residual torque during post-assembly quality assurance torque audits.
Offer Ends June 30, 2011