|
|
Series STS 7000 Stationary Torque Sensors
The Series STS 7000 Stationary Transducers are ideal for use in power and hand tool audit, calibration, and certification!
- Test electronic or mechanical hand torque wrenches
- Use with the Model 920 Instrument to test "click" wrenches (Click here to see a test procedure for "click" wrenches)
- Measure and record torque load characteristics of electric, pneumatic, or mechanical torque tools
- Audit and certify transducerized tool calibration and performance capability
- Test torque or torque-angle power tools or hand torque wrench
- Keyed base for secure installation in tool shop or on test cart
Series 7000 Stationary Torque Tool Transducers are ideal for auditing and certifying electronic and mechanical hand torque wrenches. When equipped with a simulated joint adaptor it can be used to test and verify the performance of electric and pneumatic power tools.
| Output at Rated Capacity |
2 mV/V, nominal |
| Shunt Calibration |
2 mV/V with 43.575 kOhm Precision Resistor |
| Non-Linearity |
±0.25% FS |
| Hysteresis |
±0.25% FS |
| Zero Balance |
±2% FS |
| Excitation, Recommended |
10 VDC or VAC (RMS) |
| Bridge Resistance |
350 ohm nominal |
| Compensated Temperature Range |
70 to 150 °F |
| Useable Temperature Range |
0 to 200 °F |
| Temperature Effect on Zero |
±0.01% FS / °F |
| Temperature Effect on Output |
±0.01% of Reading / °F |
| Receptacle |
Bendix PT02H-8-4P |
| Matinq Connector |
Bendix PT06A-8-4S(SR) (RST Part #42420-000600) |
| 077025-00012 |
1/4-inch sq. dr. |
100 lb-in (11.3 Nm) |
2.19 |
2.50 |
1.75 |
4.00 |
| 077037-00022 |
3/8-inch sq. dr. |
200 lb-in (22.6 Nm) |
2.38 |
2.88 |
1.75 |
4.00 |
| 077067-00051 |
3/8-inch sq. dr. |
50 lb-ft (67.8 Nm) |
2.38 |
2.88 |
1.75 |
4.00 |
| 077050-001 01 |
1/2-inch sq. dr. |
100 lb-ft (136 Nm) |
2.44 |
3.06 |
1.75 |
4.00 |
| 077050-00201 |
1/2-inch sq. dr. |
200 lb-ft (271 Nm) |
2.44 |
3.06 |
1.75 |
4.00 |
| 077075-00501 |
3/4-inch sq. dr. |
500 lb-ft (678 Nm) |
3.06 |
3.88 |
2.13 |
4.00 |
Click here to check the wiring code for PCB® Load & Torque, Inc. Stationary Torques Sensors
|