|
|
Series PC 9000 Rotary Torque Sensors
 The Series PC 9000 of Rotary Socket Torque Transducers feature High Accuracy, Rugged Durability, and Outstanding Performance!
Verify DC Electric or Pneumatic power tool performance dynamically, right on the assembly line or in the tool crib!
Completes the loop of joint design & analysis, fastener testing, and tool verification!
PCB® Load & Torque, Inc. manufactures the largest line of rotary torque sensors available.
- Capacities from 32 oz-inches (0.23 Nm) up to 18,000 lb-ft (24,408 Nm)
- Measure Torque only or Torque & Angle dynamically, as the tool tightens the fastener
- Industrial rated for Power Tool and Fastener Testing Applications, including Pulse Tools
- Compatible with PCB® Load & Torque Instruments, and most industry standard strain gage instruments, and data collectors with low-level analog inputs
- Integral part of Fastener Test Measurement System
| 1/4-inch Hex |
4.25 |
2.30 |
2.00 |
1.50 |
1.00 |
| 1/4-inch Square |
3.23 |
2.30 |
2.00 |
1.50 |
0.58 |
| 3/8-inch Square |
3.23 |
2.30 |
2.00 |
1.50 |
0.58 |
| 1/2-inch Square |
3.23 |
2.30 |
2.00 |
1.50 |
0.58 |
| 3/4-inch Square |
4.12 |
2.69 |
2.94 |
2.50 |
0.94 |
| 1-inch 1000 lb-ft Sq. |
4.00 |
2.00 |
3.63 |
3.25 |
1.15 |
| 1-inch 3000 Nm Sq |
4.00 |
2.00 |
3.63 |
3.25 |
1.15 |
| 1-inch 3000 lb-ft Sq |
4.33 |
2.44 |
4.74 |
3.875 |
1.15 |
| 1 1/2-inch 10,000 Nm Sq. |
5.50 |
2.625 |
4.88 |
4.2 |
1.595 |
| 2 1/2-inch 18,000 lb-ft Sq |
9.48 |
4.62 |
7.25 |
6.50 |
2.25 |
| Output at Rated Capacity |
2mV/V ±0.25% FS |
| Shunt Calibration |
Matched 2.000 mV/V ±0.25% with 43.575k Ohm precision resistor (except 32 oz-in, 3000 Nm, and 3,000 lb-ft capacities, which are not matched units) |
| Interchangeability |
Matched for mV/V and shunt calibration ±0.3 % FS |
| Non-Linearity |
±0.25% FS |
| Excitation Recommended |
10 V DC or AC RMS |
| Bridge Resistance |
350 ohms |
| Compensated Temperature Range |
+70 to +150 °F |
| Useable Temperature Range |
+0 to +200 °F |
| Magnetic Encoder |
360 Poles standard -- 540 poles on 3/4 inch drives -- 720 poles on 1-inch and 1 1/2-inch drives -- 900 poles on 2 1/2-inch drive |
| Output |
A - B track 90 degrees phase difference flat over operating speed range |
| Resolution w/Quadrature |
1/4 Degree; 3/16 degree on 3/4- inch, 1/8 degree on 1-inch and 1 1/2-inch drives, and 1/10 degree on 2 1/2-inch drives |
| Output Voltage |
High 5V, Low 0.5V |
| Power Required |
5 VDC @ 120 mA max. |
| 1/4-inch |
5000 |
| 3/8-inch |
2500 |
| 1/2-inch |
2500 |
| 3/4-inch |
2000 |
| 1-inch |
1000 |
| 1 1/2-inch |
750 |
| 2 1/2-inch |
500 |
Click here to check the wiring code for PCB® Load & Torque, Inc. Rotary Torque Sensors
|