|
|
Fastener Tension Load Cell
Measure clamp load with high accuracy right as the fastener is being tightened!
The Series CF 9000 Fastener Tension Load Cells are ideal for auditing and analyzing threaded fastener characteristics in production lot testing or in research and development studies!
- Perform laboratory evaluation of fastener tension or torque-tension characteristics
- Measure fastener tension, thread friction torque, or both during rundown operations
- Test special devices such as locknuts, serrated underheads, thread-locking adhesives, and friction patches
- Measure effects of materials, surface finishes, platings, and coatings
- Use standard Skidmore-Wilhelm plates or order custom plates for special fasteners
- Slotted base makes it easy to secure to existing test fixtures
| 059810-01153 |
Clamp Force Transducer |
15 kN (3,372 lbf) |
| 059810-01253 |
Clamp Force Transducer |
25 kN (5,620 lbf) |
| 059810-01104 |
Clamp Force Transducer |
100 kN (22,481 lbf) |
| 059810-01304 |
Clamp Force Transducer |
300 kN (67,443 lbf) |
| 059810-01504 |
Clamp Force Transducer |
500 kN (112,405 lbf |
| Output at Rated Capacity |
2.0 mV/V, nominal |
| Overload Capacity |
50% of rated load |
| Non-Linearity |
±0.2% of Full Scale (FS) |
| Hysteresis |
±0.2% of FS |
| Zero Balance |
±1% of FS |
| Excitation Voltage |
±10 VDC or AC RMS, max |
| Bridge Resistance |
350 ohms, full bridge, bonded strain gage |
| Compensated Temperature Range |
70 to 150 °F |
| Useable Temperature Range |
0 to 200 °F |
| Temperature Effect on Zero |
±0.01% of FS / °F |
| Temperature Effect on Output |
±0.1% of Reading / °F |
|